OUTPUT CURRENT UNDER 110V INPUT: 30-160A (MIG) 20-146A (MMA). OUTPUT CURRENT UNDER 220V INPUT: 30-205A (MIG) 20-180A (MMA). Can handle 2 and 10 pound rolls of wire. Can handle 2 lb and 10 lb rolls of wire.Gas MIG, recommended to use. 035 (0.9mm) ER70S-6 in CO2/MIG and 25%CO2 / 75% Argon MAG.
035 (0.9mm) ET71-GS flux wire. 030 flux wire is available on tension 3.5 & Amp>100A. 2T/4Tdesign: 2T- spot welding and simple work.4T- continuous long-term welding and releases your fingers. "One button selection"design, easy to choose different welding mode to meet different welding requirements, Gas/Gasless MIG, Stick or Lift TIG. Synergic Control MIG Function allows the automatic change of the voltage & wire feeding speed by adjusting the amperage or choosing different thicknesses.
It will match the welding chart set in the data. The YESWELDER MIG-205DS can easily run stick electrodes. A stinger and ground clamp are included with your machine for this process.Lift TIG available (Accessories for TIG Welding not included). 1.2T/4Tdesign: 2T is suitable for spot welding and simple work. 4T is suitable for continuous long-term welding and releases your fingers.
Welding method:Switching in different welding conditions. CO2/MIG- Co2 100%, MAG- Co2 25% Argon 75% solid wire ER70S-6, Stick welding, Lift tig welding, Gasless-Flux wire 1.0mm. Diameter of wire, Switching in different welding conditions. 035 on Co2/MIG and MAG conditions. The gas-less welding only available for 1.0.
Display showing with various value:A, V, Thickness and inductance. Amperage-When we select different values, the wire feeding speed and voltage will automatically match the welding chart built-in; The thickness, inductance & voltage is adjustable to meet the requirement for the experienced or professional welder. The voltage can only be slightly adjusted from -10 +10(1value=0.3v).